Memmert ICO - Page 31

D33451 | Date 01/2018 31
Operation and control
Only the programme currently selected in menu mode and shown in the display can be
used. If you want to process another programme, you need to activate it in menu mode
first (description from page 58).
3. To start the programme, press the confir-
mation key. The programme is executed.
The display shows:
► the programme description (in this exam-
ple
Steri 180)
► the programme segment description, in
this example
Heat up
► the current run (in case of loops)
Steri 180
Heat up
10:4412.Sept.2012
You cannot change any parameters (e.g. the temperature) at the appliance while a
programme is running. However, the displays
ALARM and GRAPH can still be used.
Cancel programme
You can cancel an active programme at any
time.
1. Press the activation key to the right of
the status display. The status display is
automatically highlighted.
0
%
manueller Betrieb
%
Fr 20.10.2010 20:31
0
°
C
80
GRAPH
8
0
GRAPH
APH
Steri 180
Heat up
10:4412.Sept.2012
2. Turn the turn control until the stop sym-
bol
■
is highlighted.
Progr. Stopp
Steri 180
10:4812.Sept.2012
3. Press the confirmation key to confirm.
The programme is cancelled.
End
Steri 180
10:4912.Sept.2012
A cancelled programme cannot be resumed at the point it was cancelled. It must be
restarted from the beginning.
End of programme
End
is shown on the display to indicate that
the programme has finished.
End
Steri 180
10:4912.Sept.2012