20
Chapter 4 Congure the Router in Wireless Router Mode
3. Configure IPTV/VLAN settings if you want to enjoy IPTV or VoIP service, or if your ISP
requires VLAN tags.
• IPTV/VLAN - Select to enable the IPTV feature.
• Mode - Select the appropriate mode according to your ISP.
• LAN 1/LAN2/Gbps LAN - Assign your LAN port to whether function as the internet supplier
or as the IPTV supplier.
Note: Whether the 1Gbps or 2.5 Gbps port is used as the WAN or LAN port depending on your settings at Advanced >
Network > Internet Port.
4. 3. 7. DHCP Server
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of DHCP Server if necessary, and
you can reserve LAN IP addresses for specified client devices.
• To specify the IP address that the router assigns:
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set for the
router.
2. Go to Advanced > Network > DHCP Server and locate the DHCP Server section.