Mercusys MR90X - Change Password; Local Management

58
Chapter 4 Congure the Router in Wireless Router Mode
To reset the router to factory default settings:
1. Click FACTORY RESTORE to reset all settings, or click RESTORE if you want to keep your
login and cloud account information.
Note:
• We strongly recommend you back up the current configuration settings before resetting the router.
• During the resetting process, do not turn off or reset the router.
2. Wait a few minutes for the restoring and rebooting.
4. 12. 3. Change Password
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set for the
router.
2. Go to Advanced > System > Administration, and focus on the Change Password section.
3. Enter the old password, then a new password twice (both case-sensitive). Click SAVE.
4. Use the new password for future logins.
4. 12. 4. Local Management
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set for the
router.
2. Go to Advanced > System > Administration, and focus on the Local Management
section.
• Access the router via HTTPS and HTTP: