Mercusys MR90X - Administration

73
Chapter 5
Congure the Router in Access Point Mode
5. 5. Administration
5. 5. 1. Change Password
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to System > Administration, and focus on the Change Password section.
3. Enter the old password, then a new password twice (both case-sensitive). Click SAVE.
4. Use the new password for future logins.
5. 5. 2. Local Management
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to System > Administration, and focus on the Local Management section.
¾ Access the router via HTTPS and HTTP:
Tick the Enable box of Local Management via HTTPS to access the router via HTTPS and
HTTP, or keep it disabled to access the router only via HTTP.
¾ Allow all LAN connected devices to manage the router:
Select All Devices for Local Managers.