300Mbps Wireless N ADSL2+ Modem Router
- 30 -
Step 2: For the configuration of the wireless adapter, please choose Enter the PIN of my
access point or wireless router in the configuration utility, and enter the PIN code
of the modem router into the field next to PIN. Then click Connect.
The WPS Configuration Screen of Wireless Adapter
Note:
The default PIN code of the modem router can be found on its label or the WPS screen in
its web configuration page.
2) PBC
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration
(PBC) method, you can add it to the network by PBC with the following two methods.
Select PBC, you will see the following screen.
Method One: Hardware push button
Step 1: Press the WPS/RESET button on your modem router for about 2 seconds or click
the Start WPS button on the screen.
Step 2: Press and hold the WPS button of the adapter directly for about 2 seconds.
To Next Page
Loading...
