￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Safety
￭￭￭￭￭￭￭￭
5
2 Safety
2.1 Intended use
This device is suitable for making measurements in chemicals and flamma-
ble samples. Therefore, the use of the 949 pH Meter requires the user to
have basic knowledge and experience in handling toxic and caustic sub-
stances. Knowledge of the application of the fire prevention measures
prescribed for laboratories is also mandatory.
2.2 Responsibility of the operator
The operator must ensure that basic regulations on occupational safety
and accident prevention in chemical laboratories are observed. The opera-
tor has the following responsibilities:
￭ Instruct personnel in the safe handling of the product.
￭ Train personnel in the use of the product according to the user docu-
mentation (e.g. install, operate, clean, eliminate faults).
￭ Train staff on basic occupational safety and accident prevention regula-
tions.
￭ Provide personal protective equipment (e.g. protective glasses, gloves).
￭ Provide suitable tools and equipment to carry out the work safely.
The product may be used only when it is in perfect condition. The follow-
ing measures are required to ensure the safe operation of the product:
￭ Check the condition of the product before use.
￭ Remedy defects and malfunctions immediately.
￭ Maintain and clean the product regularly.
To Next Page
Loading...
