Metrohm 949 - Data Processing Settings

5.7 Data processing
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
36
￭￭￭￭￭￭￭￭
NOTE
Use only the TX-900MH impact printer.
Contact your regional Metrohm representative for additional informa-
tion.
The TX-900MH impact printer includes a USB connecting cable, a Y cable,
and an RS-232 cable to connect it to the device.
5.7.2 Data processing settings
Opening Data processing settings
1
Press the button in measuring mode to access the settings.
2
Use the and buttons to select the P8.0 data processing set-
tings.
3
Confirm the selection with the button.
4
Use the and buttons to select the setting to be edited.
5
Confirm the selection with the button.
The following submenus can be found in the data processing settings:
Setting
Meaning Selection Default value
P8.1
LOG TYPE
Data collection MANUAL | HOURS |
MINUTES
MANUAL
P8.2
CLEAR DATA
Data deletion YES | NO NO
P8.3
SAVE DATA
Data output MEMORY | PRINTER MEMORY
P8.4
PRINT FORMAT
Data printout SIMPLE | COMPLETE SIMPLE