4.2 Plugging in the power cord
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
14
￭￭￭￭￭￭￭￭
4.2 Plugging in the power cord
WARNING
Electric shock from electrical potential
Risk of injury by touching live components or through moisture on live
parts.
￭ Never open the housing of the instrument while the power cord is
still connected.
￭ Protect live parts (e.g. power supply unit, power cord, connection
sockets) against moisture.
￭ Unplug the power plug immediately if you suspect that moisture has
gotten inside the instrument.
￭ Only personnel who have been issued Metrohm qualifications may
perform service and repair work on electrical and electronic parts.
CAUTION
￭ Use only the original power cord.
￭ Ensure that the electrical standards of the line on which the device is
to be installed match the voltage and operating frequency of the
device.
Plugging in the power cord
1
Plug the supplied power cord into the 5 V power socket at the rear
of the device.
2
Connect the power cord to the energy supply.
To Next Page
Loading...
