Metrohm 949 - Settings

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Operation
￭￭￭￭￭￭￭￭
19
2
Set the value with the and buttons.
3
Confirm the setting with the button.
5.4 Settings
1
Press the button in measuring mode to access the settings.
2
Use the and buttons to select the parameter to be edited.
3
Confirm the selection with the button.
The following configuration menus are available to choose from:
Designation
Meaning Options
PH SETTINGS pH settings ￭ Buffer selection
￭ Resolution
￭ Stability
￭ pH calibration data
￭ pH calibration time
￭ Reset pH settings
￭ pH temperature offset
ORP SETTINGS ORP settings ￭ ORP calibration data
￭ ORP calibration time
￭ Resetting ORP settings
￭ ORP temperature offset
LOG SETTINGS Data processing options ￭ Data collection
￭ Data deletion
￭ Data output
￭ Data printout
SETTINGS Device settings ￭ Temperature unit
￭ Date and time
￭ Brightness
￭ Serial number
￭ Resetting device settings