2.3 Requirements for operating personnel
■■■■■■■■■■■■■■■■■■■■■■
6
■■■■■■■■
2.3 Requirements for operating personnel
Only qualified personnel may operate the product. Qualified personnel are
persons who meet the following requirements:
■ Basic regulations on occupational safety and accident prevention for
chemical laboratories are known and complied with.
■ Knowledge of handling hazardous chemicals is present. Personnel have
the ability to recognize and avoid potential dangers.
■ Knowledge of how to apply fire prevention measures for laboratories is
available.
■ Safety-relevant information is communicated and understood. The per-
sonnel can operate the product safely.
■ The user documentation has been read and understood. The personnel
operate the product according to the instructions in the user documen-
tation.
2.4 Safety instructions
2.4.1 General notes on safety
WARNING
Operate this instrument only according to the information contained in
this documentation.
This device left the factory in a flawless state in terms of technical safety.
The following instructions must be observed carefully to preserve this sta-
tus and ensure non-hazardous operation of the device.
2.4.2 Electrical safety
The electrical safety when working with the device is ensured as part of
the international standard IEC 61010.
WARNING
Only personnel qualified by Metrohm are authorized to carry out service
work on electronic components.