5.7 Data processing
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
40
￭￭￭￭￭￭￭￭
3
Saving data manually
Press the button as soon as a value needs to be saved.
5.7.5 Printing data
Example: Printing out the pH value and calibration data manually.
1
Opening the settings
￭ Use the button to change to the range.
￭ Open the P8.0 memory settings.
￭ Use the and buttons to select the P8.1 memory setting.
￭ Confirm the selection with the
button.
2
Selecting Manual data collection
￭ Use the and buttons to select MANUAL.
￭ Confirm the selection with the button.
3
Selecting printing
￭ Select the P8.3 memory setting.
￭ Confirm the selection with the button.
￭ Use the and buttons to select PRINTER.
￭ Confirm the selection with the
button.
4
Selecting the print format
￭ Select the P8.4 memory setting.
￭ Confirm the selection with the button.
￭ Use the and buttons to select COMPLETE.
￭ Confirm the selection with the
button.
5
Opening the measuring mode
￭ Press the button to return to measuring mode.
6
Printing data
Press the button to print the calibration data in GLP format.
To Next Page
Loading...
