In the top panel, you can see the name of your camera (with the option to rename it), see the network
you are using to connect to Mevo Start, battery status, and microSD card remaining available storage.
You can also disconnect the app from the camera.
The rest of the menu is laid out as follows:
Vimeo: Either log into Vimeo or see information about your Vimeo account such as your remaining
upload quota and upgrade options.
Network: Change your network connection setup (e.g. switch from Mevo Hotspot mode to a Wi-Fi network).
Live Streaming Destinations: Account settings and stream configurations for Livestream, Facebook Live,
Periscope, and YouTube Live. You can also configure a signature that appears in every stream title.
Audio & Video: Configure settings impacting the camera’s video and audio setup, including:
• Frame Rate
• Built-in microphone settings
• Echo suppression
• Maximum Zoom & Tap Zoom settings
App Settings: Settings for the app's behavior such as showing or hiding the output overlay in the live
edit view. Also allows you to turn our informative tips on and off and reset them so you can see
previously viewed tips again.
Mevo Settings: Configuration settings for the camera:
• Password
• Mevo Button
• Speaker Volume
• Light Ring
• Auto Turn Off
• Auto-Wide on App Disconnect
Storage: Allows you to access your recordings library and format your microSD card.
Studio Mode: Remote camera settings when using with Livestream Studio.
About: Information about your camera, including:
• Firmware version
• App software version
• Serial number
• WiFi MAC address
• Bluetooth MAC address
Mevo Start User Manual
Page 106
To Next Page
Loading...