Mevo START - Mounting Mevo Start to a Stand or Tripod

Mounting Mevo Start to a Stand or Tripod

One side of the adapter is a 1/4"-20 UNC tripod thread, and the other side is a larger 3/8"-16 microphone
stand thread.



1/4"-20 UNC tripod thread 3/8"-16 microphone stand thread
The mount also has a built-in 5/8"-27 microphone stand thread.
Determine which thread fits your stand or tripod. If you need to use one of the threads on the adapter,
ensure that the needed thread is on the bottom and screw it into the bottom of Start until it is secure.

Mevo Start User Manual
Page 20