Mevo START - Page 171




Tips
- You can have one of each type of graphic (lower third, over-the-shoulder, corner bug)             
outputting at a time and switch them in and out as often as needed. However, you cannot have two                  
OTS graphics or two corner bugs live at the same time.
- If you wish to use a corner bug overlay and an OTS overlay simultaneously, they must be on
opposite sides of the field of view (e.g. OTS on the left, bug on the right). If you want to switch an
overlay to the other side, open the overlay preview screen and tap the corresponding box on the
opposite side to move it.
- Nothing will change in your output until you tap the checkmark on the overlay preview screen.
- 

Mevo Start User Manual
Page 171