Sequencing
42
After the flow cell is securely seated, do not move it again.
Moving the flow cell might cause the sealing gaskets to misalign
with holes of the fluidics line.
7
6
Figure 17 Loading the flow cell
If the flow cell is not absorbed properly, wipe the flow cell stage and the
back of the flow cell with a clean cloth moistened with 75% ethanol, and
then let it air-dry. Do not press the glass because it might bring particulate
matters and fingerprints or damage the flow cell.
8. Close the flow cell compartment door.
9. Tap Next.
To Next Page
Loading...