Page 12
Technical Data
thermoMETER CTL
3. Technical Data
3.1 Functional Principle
The sensors of the thermoMETER CTL series are non-contact measuring infrared temperature sensors. They
calculate the surface temperature based on the emitted infrared energy of objects, see Chap. 12. An inte-
grated double laser aiming marks the real measurement spot location and spot size at any distance on the
object surface.
The sensor housing of the thermoMETER CTL is made from stainless steel (protection class IP 65/ NEMA 4),
the controller is placed in a separate box made of die casting zinc.
i
The thermoMETER CTL sensor is a sensitive optical system. Please only use the thread for mechanical
installation.
Avoid mechanical violence on the sensor.
> Destruction of the system
To Next Page
Loading...