MICRO-EPSILON thermoMETER CTL Series - Error Messages; CTL, CTLF, CTLC-4, CTLC-2, CTLC-6, CTLG Models; CTLM-5, CTLM-1, CTLM-2, CTLM-3 L, CTLM-3 H, CTLM-3 H1 bis -3 H3 Models

Page 89
Operation
thermoMETER CTL
9.5 Error Messages
The display of the thermoMETER CTL can show the following error messages:
9.5.1 CTL, CTLF, CTLC-4, CTLC-2, CTLC-6, CTLG Models
- OVER Object temperature too high
- UNDER Object temperature too low
- ^^^CH Sensor temperature too high
- vvvCH Sensor temperature too high
9.5.2 CTLM-5, CTLM-1, CTLM-2, CTLM-3L, CTLM-3H, CTLM-3H1 bis -3H3 Models
1. digit:
- 0x No error
- 1x Sensor temperature probe short circuit to GND
- 2x Box temperature too low
- 4x Box temperature too high
- 6x Box temperature probe disconnected
- 8x Box temperature probe short circuit to GND
2. digit:
- 0x No error
- x2 Object temperature to high
- x4 Sensor temperature too low
- x8 Sensor temperature too high
- xC Sensor temperature probe disconnected