MICRO-EPSILON thermoMETER CTL Series - CAN BUS Interface

Page 59
Outputs and Inputs
thermoMETER CTL
8.2.5 CAN BUS Interface
Mount the CAN BUS adapter, see 8.2.
i
Make sure the wiring is correct, see Fig. 19.
i
We recommend for industrial installations to connect the shield of the CAN BUS cable with the control-
ler housing (inside the cable gland).
The thermoMETER CTL always needs an external power supply.
Fig. 21 View on CAN BUS interface
CAN Protocol
CAN open (see documentation on CompactConnect software CD)