Microhard Systems pX2 - Page 124

© Microhard Systems Inc. 124
5.0 AT Command Line Interface
AT+MWIFACE
Command Syntax (Effect: AT&W)
List/Add/Delete radio virtual interface.
List one or all radio virtual interface(s) :
AT+MWIFACE=0[,<Index>]
Add one radio virtual interface :
AT+MWIFACE=1
Delete one radio virtual interface :
AT+MWIFACE=2,<Index>
Index:
Radio Virtual Interface Index: 0-3
Description
Example
Input:
AT+MWIFACE=0 <enter>
Response:
Radio Virtual Interface [0]:
Network : lan
Mode : ap
TX bitrate : auto
ESSID Broadcast : Off
AP Isolation : Off
SSID : PWii
Encryption Type : psk2
WPA PSK : 1234567890
OK
AT+MWNETWORK
Command Syntax (Effect: AT&W)
Get/Set radio virtual interface: Network
AT+MWNETWORK=[<Index>[,<Network>]]
Index:
Radio Virtual Interface Index: 0-3
Network:
Radio Virtual Interface Network:
0 - LAN
1 - lan1
Description
Example
Input:
AT+MWNETWORK=0 <enter>
Response:
+MWNETWORK: Virtual Interface 0: 0 - LAN
OK
AT+MWSSID
Command Syntax (Effect: AT&W)
Get/Set radio virtual interface: SSID
AT+MWSSID=[<Index>[,<SSID>]]
Index:
Radio Virtual Interface Index: 0-3
SSID:
Radio Virtual Interface SSID: 1 - 63 character
Description
Example
Input:
AT+MWSSID=0,MySSID <enter>
Response:
OK