3 Application Installation
If...
Then...
the configured port is listed
Select the port, then click Next.
the configured port is not listed
Click Specify and enter the remaining portion of the
IPAddress, then click Next.
The IP Address must be 192.168.77.100.
12. Calibration files are installed next.
If installing multiple analyzers, at the prompt, insert the media containing the calibration
files for the next analyzer.
13. On the Installation Complete window, read the notices, then click Finish.
3 - 4
TriStar II 3020 Confirm Installation Instructions and Checklist
302-42870-04 (Rev A) — Sep 2017
To Next Page
Loading...
