1 OVERVIEW
Use these installation instructions and checklists to ensure that installation procedures are
completed properly.
It is recommended that installation procedures be performed in the order presented in
this document.
PREPARE FOR INSTALLATION
Before installation, ensure the operator has reviewed thoroughly the analyzer Pre-installation
Checklist. Ensure all required equipment and supplies are unpacked and the required personnel are
available.
When the equipment is received, unpack and inspect the contents of the shipping carton(s). Use the
packing list to verify that all products, accessories, software (if applicable), and documentation are
received intact and in the correct quantity. The shipping carton(s) and contents should be inspected
within a few days of receipt in the event damage or loss has occurred. Sort through all packing
material before declaring missing equipment or parts.
Save all shipping cartons where equipment is to be declared as damaged or lost. The
claims investigator must examine the cartons prior to completion of the inspection
report.
1 Overview
TriStar II 3020 Confirm Installation Instructions and Checklist
302-42870-04 (Rev A) — Sep 2017
1 - 1
To Next Page
Loading...
