5 Operational Verification 5 - 1
Transducer Verification 5 - 1
Verify 1000 mmHg Pressure Transducer Accuracy 5 - 1
Verify 10 mmHg Pressure Transducer Accuracy (Krypton Units only) 5 - 3
Create Sample Files 5 - 5
Step 1 - Clean and Label Sample Tubes 5 - 7
Determine the Sample Mass 5 - 9
Degas Samples 5 - 10
Install the Sample Tube 5 - 11
Fill and Install the Dewar 5 - 12
Reference Material Analysis 5 - 14
6 Installation Checklists 6 - 1
Exceptions 6 - 7
Signatures 6 - 8
Final Documentation 6 - 8
A Run Conditions A - 1
Automatic Blank Run Conditions A - 1
Manual Blank Run Conditions A - 1
Carbon Reference Material Run Conditions A - 4
B Worksheets B - 1
Sample Data Worksheet B - 2
User Information Worksheet B - 3
vi
TriStar II 3020 Confirm Installation Instructions and Checklist
302-42870-04 (Rev A) — Sep 2017
To Next Page
Loading...
