Table of Contents
Contact Us iii
About this Manual iv
1 Overview 1 - 1
Prepare for Installation 1 - 1
Dewar Precautions 1 - 2
2 Equipment Installation 2 - 1
Connect Ethernet Cable 2 - 1
Install the Vacuum Pump 2 - 2
Apply Power to the Analyzer 2 - 2
3 Application Installation 3 - 1
Add Users to Windows User Groups 3 - 6
Record User Information 3 - 7
Create User Profiles in the Administrator Utility 3 - 8
Create Password Configuration Parameters 3 - 9
Create Application User Profiles 3 - 10
Create a Service User Account 3 - 12
Start the Application 3 - 13
4 Analyzer Preparation 4 - 1
Manifold Evacuation 4 - 1
Specify Unit Selections 4 - 3
Gas Connections 4 - 4
Guidelines for Connecting Gases 4 - 5
Connect a Regulator and a Gas Line to a Gas Cylinder 4 - 6
Connect Gas to Analyzer 4 - 8
Clean and Verify the Gas Line 4 - 9
Specify Gas Ports 4 - 12
TriStar II 3020 Confirm Installation Instructions and Checklist
302-42870-04 (Rev A) — Sep 2017
v
To Next Page
Loading...
