Microsemi SyncServer S300 - Page 194

Tasks
the upgrade server described as follows:
======================================================
0 No upgrade is available.
1 An upgrade is available.
======================================================"
::= {etc 4}
etcUpgradeServer OBJECT-TYPE
SYNTAXDisplayString (SIZE(1..1024))
MAX-ACCESSread-only
STATUScurrent
DESCRIPTION
"Address of the server where new upgrades can be
downloaded."
::= {etc 5}
etcAlarmString OBJECT-TYPE
SYNTAXDisplayString (SIZE(0..1024))
MAX-ACCESSread-only
STATUScurrent
DESCRIPTION
"Defines the format for the system alarm traps. This is
only valid embedded in a trap message."
::= {etc 6}
etcAlarm TRAP-TYPE
ENTERPRISEsymmetricom
VARIABLES{etcAlarmString}
DESCRIPTION
"The trap provides notification of Hardware Clock, NTP,
system, and network alarms events.The user can configure
which alarms send traps on the ADMIN - Alarms page."
::= 0
END
Page 194..........................................................................997-01520-02 Rev. F1