www.roadwidener.com
10
Model SPD-6
3. speCIfICAtIons
Dimensions-
Length: 15 ft. 8 in. (4.8 m)
Width: Travel - 9 ft. 10 in. (2.6 m)
Track - 5 ft. (1.52 m) / 17 ft. (2.44 m) Turn Radius
Height: 8 ft. (2.44 m) Approximate
Weight: 12,320 lbs. (5558 kg)
Wheelbase: 8 ft. (2.44 m).
Tires: 4 - 455/70R 22.5 Pneumatic
Engine/Drive -
John Deere Diesel Model 4024HF295, 66 hp (49 Kw)
Powerview Digital Type Display Mounted With Key Switch Start And Stop
Hydraulic Drives
Front Steering /Drive Axle
Two Speed Hydrostatic Transmission
Hydraulic/Air Brakes, Spring Actuated
Emergency/Parking Brake
Travel Speed: 0 – 8 mph (18 km/hr.)
Working Speed: 0 – 150 ft/min.(46 m/min.)
Strike-Off Blade -
1 To 6 Ft. (1.82 m) Spread Width, 18 in. (0.46 m) High
1 Ft. (30 cm) & 2 ft. (60 cm) Modular Blade Sections
Optional Hydraulic Section 2 - 3 Ft. (60 - 91 cm)
Hydraulic Grade Control – 12 in. (30.5 cm) Above And Below Grade
Hydraulic Slope Control +/-16 %
Receiving Hopper -
2.75 cubic yards (2.1 cu. m)
9 ft. 5 in. (2.89 m) Inside Width
Material Bib - ¾'' Thick (1.905 cm) Full Width Reinforced Rubber
Conveyor -
Two Variable Drive - High Torque Hydraulic Motors Mounted On Both RH And LH Conveyor Drive Roller With
Sprockets
18 in. (46 cm) Wide, Heat And Oil Resistant Conveyor Belt Bolted To Drive Chains
Variable Speed Hydraulic Drive To 300 tph
Push Rollers -
Extendable, Oscillating, Self Cleaning
Hydraulically Adjustable To 14 in. (35 cm)
Specications subject to change without notice.
To Next Page
Loading...