Midland SPD-6 - PCOR Adjustment for P1;P2 Controls

www.roadwidener.com
278
Model SPD-6
PCOR adjustment for P1/P2 controls
PCOR setting is electrically adjusted using a proportional solenoid.
Nominal settings 240 bar [3500 psi] at 400 mA (12 V), 800 mA (24 V) or per model code.
Service Manual H1B 060/080/110/160/250 Bent Axis Motors
Adjustments
42 11024924 • Rev CB • February 2015