Midland SPD-6 - 6 S Ervice a Nd M Aintenance; Service Intervals

www.roadwidener.com
34
Model SPD-6
6. servICe And mAIntenAnCe
6.1 servICe IntervAls
Item
Interval
Daily 7
Days
50
Hrs
100
Hrs
30
Days
200
Hrs
250
Hrs
700
Hrs
Yearly 1000
Hrs
As
Req.
1. Lubricate Take Up Bearings •
2. Lubricate Column •
3. Check Hydraulic Oil Level •
4. Check Belt Scraper & Sideboard Rubbers •
5. Check Engine Oil Level •
6. Check Engine Coolant Level •
7. Check Oil Level On Rear Axle Hub •
8. Check Hydraulic Oil Filter Gage •
9. Lubricate Rear Brake Mechanism •
10. Lubricate Conveyor Chain •
11. Check Oil Level On Drive Axle •
12. Check Oil Level On Differential •
13. Lubricate Fittings On Axles And
Differential
•
14. Check Oil Level On Gearbox •
15. Lubricate Steering Articulation/Brake
Actuator
•
16. Lubricate Hydraulic Blade Extension
Guides
•
17. Lubricate Blade Hinges And Hopper Spill
Door
•
18. Lubricate Push Tubes Extension & Ball
Joints
•
19. Lubricate Hopper Pins And Cylinder
Pivots
•
20. Tighten Front Axle Screw Bolts & Lug
Nuts
•
21. Check Oil Level On Planetary Reduction
Axle Ends
•
22. Change Engine Oil •
23. Change Oil On Drive Axle And Differential •
24. Change Hydraulic Oil •
25. Change Engine Coolant •
26. Change Rear Axle Hub Oil •
27. Change Axle Planetary Oil •
28. Check And Adjust Front Axle Safety Brake •
29. Lubricate Push Rollers •
Item number corresponds to number on drawing to indicate location on machine.
Hours mentioned are machine hours.
See OEM engine, axle and transmission manuals for detailed service information.