Midland SPD-6 - Page 257

257
www.roadwidener.com
Model SPD-6
Shaft rotation direction
Shaft rotation direction is determined with a view to the shaft end. Rotation direction of the motor will be
dependent on the control option used as illustrated below and summarized in the table.
Control option L and D
Control option M and K
Control option E, F, P and T
P003488
CCW CW
CCW CW
CCW CW
Port “B” Port “A”
Port “A” Port “B”
Port “A” Port “B”
Direction of rotation (view from the shaft end)
Position of control Flow into port Direction of rotation
Control options: L
*
and D
*
A CW
B CCW
Control options: M
*
, K
*
, E
*
, F
*
, P
*
, T
*
, TA, HE and HF A CCW
B CW
*
1 = 12 V
DC
; 2 = 24 V
DC
.
Service Manual H1B 060/080/110/160/250 Bent Axis Motors
Operation
11024924 • Rev CB • February 2015 21