261
www.roadwidener.com
Model SPD-6
Sensor position
SAE and DIN housing
Cartridge housing
P003489
Target ring
Target ring size H1B 060 H1B 080 H1B 110 H1B 160 H1B 250
Number of teeth 71 78 86 95 108
Minimum displacement limiter
All Series H1 motors incorporate mechanical displacement limiters. The minimum displacement of the
motor is preset at the factory with a set screw in the motor housing. A tamper-proof cap is provided.
Service Manual H1B 060/080/110/160/250 Bent Axis Motors
Operation
11024924 • Rev CB • February 2015 25
To Next Page
Loading...