Classic Manual Rev L
51 | P a g e 1 0 - 0 0 1 - 1 R E V L
Classic Voice
New Classics in production since November 2017 are available with enhanced voice annunciations.
Older Classics can be converted to run the Voice firmware, but only if the audio files are first loaded
into the MNGP. You can load the audio files yourself (information and voice files available on the
MidNite Forum.
NOTE: Unfortunately, this self-loading process will take several hours via download. Alternatively,
you can send your MNGP to MidNite for conversion. You will pay return shipping only.
Levels of Chattiness:
Off - No voice.
Rick Mode - Arc Fault and Ground Fault warnings only.
Errors- Any errors such as "no PV voltage," "Over voltage," et cetera and the warnings above.
Warnings - All errors and warnings.
Verbose - Menu help messages the first time the menus are accessed. Information messages
such as status, charge stage and all warnings and errors.
Chatty Cathy - Menu help messages every time the menus are accessed, all the warnings,
errors and status info as described above, plus random hidden messages.
Programming Classic Voice
Depress MAIN MENU key until CHARGE is highlighted; this is the beginning of the menu tree.
Depress the RIGHT ARROW key 3 times to highlight MISC, then depress ENTER.
Depress the RIGHT ARROW key once to highlight MNGP and press ENTER.
Adjusting the volume:
o Highlight VOLUME and depress ENTER.
o Adjust the volume as needed using the UP and DOWN ARROW keys.
NOTE: Number 65 is about as loud as you can go with clarity.
Audio Mode selection:
o From the MAIN MENU press the RIGHT ARROW key 3 times to highlight MISC, then
depress ENTER.
o Press the RIGHT ARROW key twice to highlight AUDIO; depress ENTER.
o Use UP/DOWN ARROW keys to select voice mode.
NOTE: After choosing the level you want to use, you must reboot the Classic for it to
work.
Audio Reports (Only in VERBOSE or CHATTY CATHY mode):
o While in the Audio menu, press ADVANCED.
o Select the desired time interval in minutes between the STATUS and ERROR
messages.
Quiet Time
o While still in the Advanced sub-menu, depress RIGHT SOFT key, then depress NEXT.
o This is the QUIET TIME function or QT.
QT OFF = Talks 24 hours a day.
QT ON = Has a WAKEUP time and a SLEEP time. When activated, the Voices
will be silenced between the times listed during a 24-hour period.
To Next Page
Loading...
