Miele CM6 - Machine Response and Drip-Tray Sensing; Power Supply Failure Response; Drip-Tray Sensing

Technical Information
20
CM6
Figure 001-16: Drain Position, Rear View
Figure 001-17: Front View
2.4 Machine Response after Power Supply Failure
After a break in the power supply, the machine remains switched off (standby).
The fault memory and all settings carried out by the customer remain unchanged.
2.5 Drip-Tray Sensing
2.5.1 Fill Level
The amount of water flowing into the drip tray is registered by the flow meter. When a
certain amount is reached, the “Empty drip tray” message will be displayed.
The value for the water amount is saved when the appliance is switched off; emptying
the drip tray after shutoff will not change this value. See also Section 001-3.18.
2.5.2 Presence
The drip tray present switch (S87-1) detects when the drip tray is inserted.