Miele CM6 - Figure 001-37: Grinder Screws and Ground Coffee Chute Base Screw; Figure 001-38: Grinder Thermostat

Technical Information
50
CM6
Figure 001-37: Grinder Screws and Ground Coffee Chute Base Screw
15. Take out the grinder.
16. Take out the ground coffee chute base.
17. Take off the grinder insulation.
18. Remove the thermostat from the grinder (see Figure 001-38, Item 1).
Figure 001-38: Grinder Thermostat
19. Disconnect the two wires from the grinder.