Miele CM6 - Table 001-3: Machine Settings (Customer Programming)

Technical Information
36
CM6
Function Setting
Info
No. of
drinks
Latte
macchiato
The number of serving cycles carried
out is displayed.
Long coffee
Caffê Latte
Hot milk
Milk froth
Hot water
Number of
uses until
Descaling
The number of servings until
descaling is required is displayed.
Degreasing
the brew
unit
The number of servings until brew
unit degreasing is required is
displayed.
System lock
On
System lock is switched on.
The machine can be
safeguarded against accidental
switch-on.
Off
System lock is switched off.
Water hardness
Soft (0 - 4 grains per gallon)
Medium (5 - 9 grains per gallon)
Hard (10 - 18 grains per gallon)
V
ery hard (> 18 grains per gallon)
Display brightness Level 1 to 7 (dark to bright) (Level 4)
Volume
Buzzer tones
Level 1 to 7 (quieter to louder)
(Level 4)
Keypad tone
Level 1 to 7 (quieter to louder)
(Level4)
Cup heating (CM 63x0 only)
On
Of
f
Showroom program
On
The demonstration mode has
been activated. The appliance
can be operated but heating
will not take place.
Off
The demonstration mode is
deactivated. Heating will take
place.
Factory default
Do not reset
All modifications made by the
customer will not be reset to
standard settings.
Reset (not available in
demo mode)
All modifications (except the
language setting) will be reset
to standard settings. The
showroom program remains
unchanged. Settings made in
service programming mode
and in service mode remain
unchanged.
Table 001-3: Machine Settings (Customer Programming)
1
To prevent limescale buildup in the heater, descaling must be carried out more frequently with hard
water.
2
The set water hardness will affect when “50 servings until descaling” is displayed; see Table C-3.
Back:
Press the
touchpad.