Miele CM6 - Figure 001-35: Beans Container Screws; Figure 001-36: Ground Coffee Chute Screws

Technical Information
49
CM6
Figure 001-35: Beans Container Screws
10. Take off the beans container and the center cover piece.
11. Remove the chute present switch from the ground coffee chute (shown at the top
left in Figure 001-36).
12. Remove the T10 screws securing the ground coffee chute (Figure 001-36, Item 1)
(number of screws may vary by model).
Figure 001-36: Ground Coffee Chute Screws
13. Take off the ground coffee chute.
14. Remove the 4 T10 screws (Figure 001-37, Items 1 and 2).