Miele G 7604 - Standard Settings; Setting the Language; Setting up Miele@Home

Using for the first time
25
Standard settings
Switching on the dishwasher
 Switch the dishwasher on using the
sensor.
The welcome screen will appear when
the dishwasher is switched on and the
welcome melody will sound.
For further information about the
display functionality, see “Guide to the
appliance - Display functions”.
Setting the language
The display will change automatically to
the screen for setting the language.
 Select the language and the country,
if applicable, using the sensors,
and confirm with OK.
For further information on setting the
language, see “Settings - Language”.
A tick  will appear next to the language
that has been set.
Setting up Miele@home
The message Set up Miele@home will
appear in the display.
 To set up Miele@home now, confirm
by touching OK.
Useful tip: To postpone setup until later,
select the optionSkip and confirm with
OK.
There are two ways of connecting your
dishwasher to your Wi-Fi network:
 Select the connection method you
want and confirm your selection with
OK.
1. Connect using App
2. Connect using WPS
You will then be guided by the display
and the Miele App.
For further information on
Miele@home, see “Settings -
Miele@home”.