EasyManua.ls Logo

Miele G 7604 - Volume; Refill Reminders

Miele G 7604
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Settings
44
Volume
A sequence of signal tones will sound at
the end of the programme or if there is a
fault, provided that the acoustic signals
are activated.
Signal tones in the event of a fault
In the event of a fault, the alarm tone
will sound fourtimes at intervals with a
short pause between each set of tones.
The alarm tone that sounds when
there is a fault cannot be deactivated.
Signal tones
The signal tones at the end of a
programme will sound fourtimes at
intervals with a short pause between
each tone.
The volume of the signal tones at the
end of the programme can be set to one
of seven different settings. If no volume
is selected, the signal tones are
switched off.
Keypad tone
An audible tone sounds each time a
sensor is pressed.
The volume for the keypad tone can be
set to one of seven different settings. If
no volume is selected, the keypad tone
is switched off (except for the On/
Offsensor).
Welcome melody
If you switch the dishwasher on or off, a
brief melody will sound.
You can switch this melody off.
Refill reminders
If you only ever use combination
detergent products or automatic
dispensing using Miele PowerDisks (if
available), you can switch off the refill
reminders for dishwasher salt and rinse
aid if you wish.
Please make sure that if you stop
using combination detergents, you
refill the dishwasher salt and rinse
aid. Switch the refill reminders back
on.

Table of Contents

Related product manuals