Miele G 7604 - Cleaning the Autodos

Cleaning and care
96
Cleaning the AutoDos
If the Clean AutoDos message is
displayed, check that the AutoDos is
clean, and clean it if necessary, e.g.
powder residues. This helps keep the
AutoDos working properly.
In order to ensure that the AutoDos
function works at its best, check it
each time you replace the PowerDisk
and clean it if needed.



PowerDisk holder
Yellow opening tag for unlocking the
PowerDisk holder
Yellow tabs on the PowerDisk holder
 Slide the yellow catch of the AutoDos
lid to and open it.
 Remove the PowerDisk if applicable.
1
2
 Unlock the PowerDisk holder by
pulling the yellow opening tag in the
direction of the arrow and
simultaneously pull the PowerDisk
holder upwards using the yellow
tabs.
 Clean the AutoDos housing and the
PowerDisk holder with a damp cloth.
 Dry all parts well so that the
detergent powder does not clump
together.
It is very important that no moisture
stays inside the AutoDos system
during cleaning.