Cleaning and care
97
Pull the yellow pull tab in the direction
of the arrow and reinsert the
PowerDisk holder at the same
time. To do this, the arrows in the
PowerDisk holder and in the viewing
window must point towards each
other. The holder must lie flat.
The AutoDos lid must close tightly so
that the detergent powder does not
get wet and clump together.
Make sure that all seals are clean and
clean them if necessary.
Insert a filled PowerDisk and press it
evenly downwards until it sits flush.
Close the AutoDos lid and slide the
yellow catch until it is aligned with the
symbol (see “Detergents -
Inserting a PowerDisk”).
Regularly check the lower spray arm
for any blockages to ensure that the
detergent outlet of the AutoDos can
be fully flushed out (see “Cleaning
and care - Cleaning the spray arms”).