Miele G 7604 - Water Connection; System Lock; Deactivating the System Lock

Settings
46
Water connection
You can set your water connection type.
 If you select Automatic (default), the
dishwasher detects which water
connection is currently being used
and automatically selects the right
setting.
 Select Cold water if you are only using
a cold water connection.
 Select Warm water if you are only
using a hot water connection.
System lock

The system lock prevents your
dishwasher being used without your
knowledge.
If an attempt is made to switch the
dishwasher on when the system lock is
activated, the symbol will appear in
the display.
The lock must be deactivated before the
dishwasher can be used.
The appliance will lock each time it is
switched on as long as the system lock
is activated.
The appliance is delivered with the
system lock deactivated.
Deactivating the system lock
To unlock the dishwasher, proceed as
follows:
 Switch the dishwasher on using the
sensor.
The symbol appears in the display.
 Touch the OK sensor for 6seconds.
After 6seconds, the dishwasher will be
unlocked and ready for use.