Operation
80
Interrupting a programme
A programme will be interrupted as
soon as the door is opened.
If the door is closed again, the
programme will continue from the point
it was at before the door was opened.
Risk of scalding due to hot water.
During operation, water in the
dishwasher may be very hot.
Only open the door if absolutely
necessary and exercise extreme
caution when doing so. Before
closing the door again, leave it ajar for
approx. 20 seconds. This will enable
the temperature in the wash cabinet
to settle.
Cancelling or changing a
programme
If a programme is cancelled,
important programme stages may be
missed.
A programme should only be
cancelled in the first few minutes of
the programme sequence.
If a programme has already started and
you wish to cancel it, proceed as
follows:
Switch the dishwasher off with the
sensor.
Use the sensor to select the Switch
appliance off option.
Confirm the query Switch appliance off
with OK.
If you would like to select another
programme:
Switch the dishwasher back on using
the sensor.
If you have dispensed detergent
manually, check whether the
detergent compartment is still closed.
If the lid is already open, fill it with
detergent again and close the lid.
Select the programme you want and
start it.
To Next Page
Loading...
