Miele G 7604 - Cutlery Tray; Loading the 3 D Multiflex Tray

Loading the dishwasher
60
Cutlery tray
See “Loading the dishwasher - Loading
examples” for examples of how to load
crockery and cutlery.
 Load cutlery into the 3D MultiFlex
tray.
Loading the 3D MultiFlex tray
To make unloading easier, cutlery should
be grouped in zones: one for knives, one
for forks, one for spoons, etc.
Spoon heads should be placed to rest
on the serrated retainers on the base of
the tray to ensure that water runs off
them freely.
 If spoon handles do not fit between
the holders, lay them the other way
round.
You can push the left insert to the
middle in order to accommodate tall
items and long stemmed glasses in the
upper basket.
You can put large and long cutlery in the
recessed centre part of the tray.
Arrange tall items (such as cake
servers) so that they do not block the
upper spray arm.
You can adjust the height of the right-
hand insert to create more space in the
right-hand part of the tray for larger
cutlery items or smaller pieces of
crockery.
 Pull the insert inwards by the yellow
handle and click it into place in one of
the two positions.