EasyManua.ls Logo

Miele G 7604 - Automatic Dispensing;Autodos; Activating Autodos

Miele G 7604
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Detergents
71
Automatic dispensing/AutoDos
Before you can use AutoDos, you must
insert a PowerDisk containing powder
detergent into the PowerDisk
compartment.
One PowerDisk contains enough
detergent for approx. 20cycles,
depending on the selected programme.
PowerDisks are available to purchase
from the Miele online store, Miele
Customer Service or a Miele
Experience Centre.
Risk of chemical burns from
residual detergent.
Detergents have a caustic effect. This
can cause health problems and
damage to surfaces. If the AutoDos
is used incorrectly, residual detergent
may drip onto the floor area in front
of the dishwasher.
Always remove residual detergent
from in front of the dishwasher
immediately.
Activating AutoDos
Switch the dishwasher on using the
sensor.
Before you first use AutoDos, remove
the tab from the AutoDos lid and
dispose of the tab appropriately.
Insert a PowerDisk (see “Automatic
dispensing/AutoDos - Inserting a
PowerDisk”).
TheAutoDos function will be
activated automatically.
The message AutoDos activated will
appear in the display.
This setting applies to all programmes
and you can change it at any time using
the AutoDossensor.
If no programme is started for
48hours, the PowerDisk will
automatically be rotated so that the
detergent does not clump together. If
this happens, the messagePowder
refreshing will appear in the display
when the dishwasher is switched on.
No detergent is dispensed during this
refreshing process.

Table of Contents

Related product manuals