Settings
43
Deleting the electricity tariff times
You can delete the settings for an
energy tariff time and in doing so
deactivate the EcoStart option for this
time zone.
Use the sensors to select an
electricity tariff time T1 to T3 that you
wish to delete and confirm with OK.
For example, select Delete T1 and
confirm with OK.
For example, select Delete T1? and
confirm with OK.
The settings for the electricity tariff time
selected will be reset.
Confirm the message with OK.
The energy tariff time has been deleted.
Display (EcoFeedback)
You can set whether the energy and
water consumption is displayed for the
selected programme. This function
shows the estimated consumption
before a programme sequence and the
actual consumption after the end of the
programme (see “Caring for the
environment – EcoFeedback
consumption display”).
Display brightness
You can set the display brightness to
one of seven different levels.
To Next Page
Loading...
