Miele G 7604 - Page 84

Options
84
Set the time by which the selected
programme needs to be finished.
 Use the sensors to enter the
hour and confirm your entry with OK.
The hour will be saved and the minute
number block will be highlighted.
 Use the sensors to enter the
minutes and confirm your entry with
OK.
The messageWaiting for SmartStart will
appear in the display.
The Startsensor lights up for a few
minutes.
The selected programme will start
automatically as soon as the energy
provider has sent the signal or when the
latest possible calculated start time has
been reached.
The time remaining will be shown in the
display, the sensor will go out and
the Startsensor will light up.
Changing or deleting the timer
You can change the time set for the
timer or delete it.
 Touch the sensor.
The previously activated timer function
is displayed.
 Confirm with OK.
 Use the sensors to select the
Change or Deletefunction and confirm
with OK.
After confirming the Change function
with OK, you can change the time set
for the timer.
After confirming the Delete function with
OK, the duration of the selected
programme will appear in the display.
The sensor goes out and the
Startsensor flashes.
You can now start a programme or
switch the dishwasher off.
Switching the dishwasher off while a
timer is running stops the timer.
You can also change or delete the time
set for the timer using the MieleApp.