Mikro DPM380 - Reset Maximum & Minimum Value

24
6.10. RESET MAXIMUM AND MINIMUM VALUE
a. Scroll until ”rSEt“ is displayed using the UP or the DOWN
button.
b. Press the NEXT button. The “PROG” symbol will blink.
Use the UP or DOWN button to toggle “YES” or “NO”
symbols.
c. To abort clearing max. and min. values, select “NO”. To
clear all max. and min. values select “YES”.
d. Press the NEXT button to confi rm new setting.
e. To proceed next setting press DOWN button.To exit
programming mode, press the PROG button. The user
will be prompted to confi rm the saving of settings if
change is made. Refer section 6.16.