28
6.14. RESET HOUR-ON REGISTER
a. Scroll in programming mode until ”Hron rSt“ is displayed
using the UP or the DOWN button.
b. This function is to clear hour-on register.
c. Press the NEXT button. The “PROG” symbol will blink.
Use the UP or DOWN button to toggle “YES” or “NO”
symbols.
d. To abort clearing hour-on register, select “NO”. To clear
hour-on register select “YES”.
e. Press the NEXT button to confi rm the new setting.
f. To proceed next setting, press DOWN button.
g. To exit programming mode, press the PROG button. The
user will be prompted to confi rm the saving of settings if
change is made. Refer section 6.16.
To Next Page
