Miller Infinity Series - Alarm Control

OM-269681 Page 18
4-12. Alarm Control
OM-269681 Page 1
The Alarm emits an audible
signal and flashes the Grind
mode light to alert the operat-
or at a specific time.
1 Info Control Button
Alarm Procedure
 Press Auto On/Off but-
ton to turn helmet On.
 Press Info button re-
peatedly until Alarm is
displayed on screen.
 Press left/right arrows to
select hour or minutes
for adjustment
 Use up/down arrows to
adjust to desired time.
2 Set Selection
3 Alarm On Indicator
 Use left/right arrows to
select Set. Use up/down
arrows to turn Alarm On/
Off.
 Press the OK button to
save, or press the Auto
On/Off button to exit.
 Press any lens button to
turn off alarm.
1
2
3
The Alarm emits an audible signal and
flashes the Grind mode light to alert the op-
erator at a specific time.
1 Info Control Button
Alarm Procedure
l Press Auto On/Off (Mode) button to turn
helmet on.
l Press Info button repeatedly until Alarm
is displayed on screen.
l Use left/right buttons to select hour or
minute for adjustment.
l Use up/down buttons to adjust to de-
sired time.
2 Set Selection
3 Alarm On Indicator
l Use left/right buttons to select Set. Use
up/down buttons to turn Alarm On/Off.
l Press the OK button to save, or press
the Auto On/Off (Mode) button to exit
F
Press any lens button to turn off alarm.