OM-269681 Page 6
SECTION 3 – SPECIFICATIONS
F
Please register your product at www.MillerWelds.com/Support/Registration
Specification Digital Infinity Helmet
Viewing Field 4.4 x 3.1 in (112 x 78 mm)
Reaction Time 0.0000500 sec (1/20,000)
Available Shades
All Shades Provide
Continuous UV And
IR Protection.
Weld Mode Darkened State: No. 8 - No. 13 Light State: No. 3
Cut Mode Darkened State: No. 5 - No. 8 Light State: No. 3
Grind Mode Light State: No. 3
X-Mode Darkened State: No. 8 - No. 13 Light State: No. 3
Sensitivity Control Adjustable For Varying Ambient Light And Welding Arc
Delay Control Slows Lens Dark-To-Light State Between 0.1 And 1.0 Seconds
Automatic Power Off Shuts Lens Off 45 Minutes After Last Arc Is Struck
Low Battery Light Red Led Illuminates To Indicate 2-3 Days Remaining Battery Life
Power Supply Panasonic CR2450 Lithium Batteries (Miller Part No. 217043)
Sensors Independent/Redundant (Four)
Operating
Temperature
14°F to 131°F / -10°C to +55°C
☞ When Stored In Extremely Cold Temperatures, Warm Helmet To
Ambient Temperature Before Welding.
Storage Temperature
-4°F to 158°F / -20°C to +70°C
☞ When Stored In Extremely Cold Temperatures, Warm Helmet To
Ambient Temperature Before Welding.
Total Weight 23 oz (650 g)
Standards Meets ANSI Z87.1+ And CSA Z94.3 Standards
Warranty Three Years From Date Of Purchase (Section 12)
To Next Page
Loading...
