Miller Multimatic 200 - Section 12 − Parts List; Drive Rolls; MDX Welding Gun Consumables

OM-253392 Page 61
SECTION 12 − PARTS LIST
. A complete Parts List is available at www.MillerWelds.com
12-1. Drive Rolls
Part No. Wire Diameter In. (mm)
261157 0.024 (.6), 0.030/0.035 (0.8 and 0.9) (Standard) and
0.030/0.035 (0.8 and 0.9) (VK Groove)
220179 0.024 (0.6) and 0.030/0.035 (0.8 and 0.9) (Standard)
202926 0.030/0.035 (0.8 and 0.9) and 0.045 (1.2 VK Groove)
 Optional
12-2. MDX Welding Gun Consumables
See OM-282976 (shipped with this product) for information on replacement consumables for the MDX welding gun.