Using the Direct-Q R
35
3
Press the Dispensing Button once. The
system will dispense water. The Display
will show the amount of water
dispensed and the Product resistivity.
To stop dispensing water, press the
Dispensing Button once again.
4
To exit the menu, press and hold the
Main Button for 2 seconds.
To display the next menu option, press
the Main Button once.
The Direct-Q water systems has been designed to operate permanently
connected to feed water, plugged to an electric power source and in regular
operating mode. Do not unplug the Direct-Q system except when required by
the user manual for maintenance purposes. Do not place the system in
STANDBY mode except when maintenance needs to be performed.
ATTENTION
To Next Page
Loading...
Need help?
General
